Mercedes S-Class W-220

since 1998 of release

Repair and car operation



W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of a road clearance of a body of the car
      Removal and installation of the steering mechanism
      Pump of the amplifier of a steering
      Dismantling and assembly of the pump of the amplifier of a steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the bottom steering shaft
      Removal and drive installation for telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe
      Removal and installation of the blocking cylinder
      Contact spring
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы





Removal and installation of the steering mechanism

1g — the Clamping level
10a — the Hinge of a traction bar
21 — the Rubber plug
23 — Reechnoye management
23a — Screws

23g — Bolts, 45 Nanometers + 60 °
23k — the Screen
23s — the Clamping level of oil lines
25 — Connection of the steering mechanism
a — the Socket


Removal of a tip of steering draft

10 — Steering draft
10a — the Hinge of a traction bar, 55 H • m

10f — the Lock-nut


Removal

 PERFORMANCE ORDER

1. Establish a steering column in the extended situation.
2. Remove liquid from the tank of the amplifier of a steering.
3. Disconnect conducting, pipelines and steering drafts.
4. Remove the lock of blocking of a steering shaft. The steering wheel should not have possibility to rotate, differently contact spring А45 can be damaged after replacement.
5. Disconnect a steering shaft from a shaft of the steering mechanism.
6. Unscrew bolts and remove the steering mechanism.


Installation

 PERFORMANCE ORDER

1. Establish the steering mechanism in average situation.
2. Establish the steering mechanism and tighten it to a support on a forward beam.
3. Further installation is carried out as it should be, the return to removal.
4. Fill in liquid in the tank of the amplifier of a steering and check work and absence of leaks.





home