Mercedes S-Class W-220

since 1998 of release

Repair and car operation



W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of a road clearance of a body of the car
      Removal and installation of the steering mechanism
      Pump of the amplifier of a steering
      Dismantling and assembly of the pump of the amplifier of a steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the bottom steering shaft
      Removal and drive installation for telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe
      Removal and installation of the blocking cylinder
      Contact spring
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы





Conditions of check of corners of installation of wheels

Check of corners of installation of the car demands existence of a viewing ditch or the special measuring lift. At carrying out measurement it is necessary to satisfy the following conditions:

- Pressure of air in tires corresponds to the set.
- Forward wheels are put directly.
- The car is not loaded, the fuel tank is completely filled.
- Suspension brackets of the car were with force осажены.
- The steering is adjusted.
- Lyufta in connections of steering drafts lie within the admissible.
- Lyufta in connections of a suspension bracket lie within the admissible.
- Depth of drawing of a protector of tires of one axis is identical.