Mercedes S-Class W-220

since 1998 of release

Repair and car operation



W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of a road clearance of a body of the car
      Removal and installation of the steering mechanism
      Pump of the amplifier of a steering
      Dismantling and assembly of the pump of the amplifier of a steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the bottom steering shaft
      Removal and drive installation for telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe
      Removal and installation of the blocking cylinder
      Contact spring
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы





Removal and drive installation for telescopic adjustment of a steering column

Removal

 PERFORMANCE ORDER

1. Unscrew a bolt 84 and take telescopic drive М20m1.

2. Remove the blocking device 84b and take a finger 84а from an external pipe 81а.

3. Remove a telescopic drive of adjustment М20m1.


Installation

 PERFORMANCE ORDER

1. Establish telescopic drive М20m1 on an external pipe 81а and insert a finger 84а.
2. Fix the blocking device 84b.

3. Using the indicator 22, adjust a pipe gap. For this purpose move telescopic drive М20m1 and a bolt 84 to an oblong opening so that the gap was reached. The gap should be within 0.25 - 0.30 mm.

4. Tighten a bolt 84.





home