Mercedes S-Class W-220

since 1998 of release

Repair and car operation



W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
- Brake system
   Specifications
   Arrangement of components of the amplifier of emergency braking of BAS
   Arrangement of components of ESP system
   Dual main brake cylinder
   Vacuum amplifier
   Brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of brake shoes
   Removal and installation of a forward cable of a drive of the parking brake
   Adjustment of the parking brake
   System of anti-blocking of brakes of ABS, protivozanosny system - an arrangement of elements
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы





Brake system

Main information

Stoplight Е4е4 in a back lamp


The hydraulic brake system consists of the main brake cylinder, the amplifier of a brake and disk brakes of lobbies and back wheels. The brake system has two contours. One contour influences forward brakes, another - on back. At refusal of one of contours, for example, owing to leakage of liquid braking of the car is carried out by other contour. Pressure of liquid in both contours is created by the doubled main brake cylinder operating from a pedal of a brake.

The description of work of systems of anti-blocking of brakes of ABS, the amplifier of emergency braking of BAS and the electronic program of stabilization of stability (Protivozanosny system) is provided in the Operation manual.

The tank with brake liquid is under the main brake cylinder, it supplies with liquid all hydrosystem of braking.

The amplifier of a brake accumulates a part of the vacuum created in the soaked-up pipeline of the engine. As the diesel engine has no necessary vacuum on absorption, cars with the diesel engine have the special vacuum pump. By means of the corresponding valve if necessary the effort to pedals of a brake increases thanks to vacuum action.

The parking brake with a pedal drive influences through cables brakes of back wheels. As as the parking brake the disk brake does not work, on back wheels the drum-type brakes which have been built in disk brakes are in addition established. Drum-type brakes are put in action only from a pedal of the parking brake.

Security measures

When cleaning brake system the dust is allocated, which can harm health of the person therefore to inhale a brake dust it is impossible.

Work with brake system demands special purity and exact observance of instructions. In the absence of necessary experience it is expedient to address on HUNDRED.

At movement on wet roads it is necessary to press periodically a brake pedal for moisture removal from disks of brakes.

In the course of wheel rotation moisture under the influence of centrifugal force is dumped from brake disks, but there is a silicone film, products of an istiraniye of rubber, greasing and the other pollution reducing efficiency of brakes.

After installation of new brake shoes the last should be earned extra. Therefore the first 200 km of run it is not necessary to brake strongly needlessly.

The disk brakes having corrosion, when braking create the effect of jolting which is not disappearing over time. In this case it is necessary to replace brake disks.

To a surface of brake shoes and rain flutes lead dirt burning to formation of furrows on a surface of brake disks that leads to decrease in efficiency of braking.





home