Salon equipment
Internal lighting
1. The forward left lamp for reading
Inclusion and lamp switching off for reading: press the button.
The left lamp for reading-7-in an internal rear-view mirror joins or switched off.
2. Plafonds in a back part of salon
Inclusion and plafond switching off in a back part of salon: press the button.
3. The forward right lamp for reading
Inclusion and lamp switching off for reading: press the button.
The right lamp for reading-8-in an internal rear-view mirror joins or switched off.
4. Switching off of automatic function: press perekidny the switch.
Plafonds remain switched off and in case the car opens, one door or an electronic key opens is taken out from the ignition lock.
5. Inclusion of automatic function: Perekidny switch on the average situation.
If at darkness approach the electronic key is taken out from the ignition lock, plafonds join and with endurance of time are switched off.
Plafonds join, if at approach of darkness one door opens. When opening one of forward doors the forward plafond joins, when opening one of back doors back plafonds join.
If doors are closed, plafonds are switched off with endurance of time.
If the car opens at darkness approach, plafonds join and switched off with endurance of time.
At one open door and finding of an electronic key in situation 0 or its vynimaniya, plafonds are switched off approximately in 5 minutes after all electronic equipment of the car is in a starting position.
6. Inclusion of a forward plafond manually:
Press perekidny the switch. Until the switch is pressed perekidny, forward phone is switched on.
Switching off of a forward plafond:
Perekidna the switch in situation 4 or 5.
The back lamp for reading
7. Inclusion and switching off of lamps for reading:
Lamps for reading-8-in the left or right plafond in a back part salon-9-join or switched off.
Illumination of elements of salon
For the best orientation in the dark your car is equipped in salon with various devices of lighting.
Lighting at door opening/closing:
The electronic key in the lock of ignition is in situation 1 or marker lights are included. Lamps in deepenings for opening/closing of doors burn.
If the electronic key in the lock of ignition turns in situation 0 and is turned off the light, the delay of switching off of lamps makes about 5 minutes.
Illumination of space for feet:
Marker lights are included. The space for feet is shined.
Illumination of the average console:
The electronic key in the lock of ignition is in situation 1. Illumination of the average console is made from an internal rear-view mirror.
Door lamps for an exit from the car
If at approach of darkness one of doors and internal lighting opens is switched to an automatic mode, the corresponding door lamp for an exit from the car joins.
After door closing the door lamp for an exit from the car is automatically switched off.
Shtorka of back glass
The switch is on the average console.
Electronic key in the lock of ignition turn in situation 1 or 2.
Press the switch:
1 — Lifting
2 — Lowering
Shtorka of back glass should be lowered or lifted always completely.
|
|
Watch that process of movement of a shtorka of back glass was not interfered by subjects (for example, clothes). |
Sun-protection peaks
There is a danger of failure!
In order to avoid dazzle leave covers over mirrors-2-during movement closed.
For protection against dazzle in front:
Sun-protection peaks cast away down.
For protection against dazzle from lateral glasses:
Deduce a sun-protection peak from the holder-1-on inside and take aside.
Cosmetic mirror
There is a danger of failure!
In order to avoid dazzle leave covers over mirrors-3-during movement closed. 1 — the Shined cosmetic mirror in a sun-protection peak
Opening: the sun-protection peak should be fixed in the holder-2-. Cast away a cover-3-up. Lighting-4-joins.
Move a mirror to the left or to the right, half of a mirror reflect the normal or increased image.
Closing: cast away a cover down.
5 — the Shined cosmetic mirror in a back part of salon
Opening: slightly press a cover, the mirror leans back, and lighting joins.
Closing: turn a mirror up before fixing.
|
|
In order to avoid damages, before installation of a seat of the driver or the forward passenger from situation for lying in situation for movement, close the corresponding cosmetic mirror. |
Salon
There is a danger of a travmirovaniye!
In salon it is not authorized to transport heavy or firm subjects in a loose condition.
Otherwise, at strong braking, sharp change of the direction of movement or failure passengers can be injured by them.
Safety grids for luggage cannot hold heavy and firm subjects.
Ware compartments and consoles armrests
There is a danger of a travmirovaniye!
In the presence of subjects in ware compartments the last during movement should be closed.
Ware box
1 — Unlocking
2 — Locking
3 — Opening
In a cover of a ware box there is a compartment-4-with deepenings for cards with a format of credit cards, a pocket lamp and a ball pen.
Compartment opening in a cover of a ware box:
Slightly press a cover in a marking place.
Ware compartments on the average console
5 — Office for points on the average console
6 — Section below on the average console
Office for points
Opening:
Slightly press a cover below in a marking place.
Closing:
Cover press down to fixing.
Bottom section
Opening:
Cover push forward, holding a marking place.
Closing:
Slightly press a cover forward in a place of marking and release. The cover is automatically closed.
Runduchok in front of the console armrest
7 — Runduchok in front of the console armrest
Opening:
Slightly press a cover from above in a marking place.
Closing:
Move a cover up before fixing.
Vynimaniye of an insert:
Pull out an insert, having grasped it through deepening in the handle.
Runduchok before a seat of the driver
8 — Runduchok before a seat of the driver
Opening:
Having compressed buttons-9-, cast away a cover down.
Closing:
Cast away a cover up before fixing.
Ware compartments under the console armrest
In ware compartments under the console armrest there is also an office for coins.
Runduchok in the console armrest
Opening: having pressed the button-10-, lift the console armrest.
Closing: the console armrest lower down and fix.
|
|
Models with the conditioner in a back part of salon |
In dredging under a runduchok not to put any subjects.
Ware compartment under the console armrest
Models without the conditioner in a back part of salon
Opening: having pressed the button-11-, lift the console armrest.
Closing: the console armrest lower down and fix.
The temperature in a ware compartment can strongly raise that is caused by limited space. Therefore at transportation of heatsensitive cargo it is necessary to close a ventilating nozzle of the included heating.
Ventilating nozzle in a runduchka do not close subjects.
Using phone in a back part of salon
For simplification of using phone in a back part of salon, phone can be moved back.
Having pressed the button-11-(address to an illustration at the left), cast away the console armrest back before fixing.
Having pressed the button-12-, completely cast away a console armrest cover.
Armrest of back seats
Extend an armrest-13-above and cast away it on a back seat.
Opening runduchka:
Having pressed the handle-14-up, cast away an armrest up.
Runduchok between back seats
Opening runduchka:
Cover-15-move back.
Runduchok on the back shelf
Opening runduchka:
Lift a cover-16-.
The holder for drinks
There is a danger of a travmirovaniye!
During movement the holder for drinks should be closed. Use only suitable capacities, in order to avoid burns do not insert in the holder hot drinks.
1 Holder for drinks in an armrest
Opening:
Take a cover aside.
Closing:
Cast away a cover back.
2 Holder for drinks in an armrest of a back seat
Opening:
Press a drawer, the holder for drinks is nominated.
Closing:
Push a drawer before fixing.
Folding little table in a back part of salon
Otkidyvaniye of a little table:
Press the button-1-, and cast away a little table-2-up in necessary situation before fixing.
|
|
Fixing of a little table is possible in the 3rd provisions. |
Little table folding:
Completely lift a little table and turn down to fixing.
There is a danger of a travmirovaniye!
During movement the folding little table should be difficult.
Otherwise, at strong braking, sharp change of the direction of movement or failure passengers can be injured by the subjects which were on it or a little table.
Ashtray
Average console
Opening:
Slightly press a cover in a marking place, the ashtray is put forward.
Vynimaniye of an insert:
There is a danger of failure!
Switch off the engine and press the parking brake in order to avoid a spontaneous troganiye of the car from a place.
|
|
Transfer the AT selector lever to situation N. |
The slider-1-move to the right. The insert is a little put forward.
Insert installation:
Press an insert before fixing.
Back doors
Opening:
Slightly press a cover behind, the ashtray moves back.
Vynimaniye of an insert:
Having a little pulled an ashtray to itself, take out an insert.
Insert installation:
Establish an insert and at return moving press down.
Lighter
1 Lighter on the average console
There is a danger of a travmirovaniye!
The hot lighter take only for the handle.
At a povorachivaniye of an electronic key in the ignition lock in situation 1 or 2 watch that children could not burn the hot lighter.
2 Lighter on back doors
The electronic key in the lock of ignition is in situation 1 or 2.
Press the lighter: the vyskakivaniye occurs automatically as soon as the spiral is heated.
The plug receptacle of the lighter can be used for connection of elements of a special complete set.
Safety grid for luggage in space for feet of the forward passenger
There is a danger of a travmirovaniye!
The safety grid for luggage is provided only for transportation of easy cargo.
Heavy, and also fragile subjects and subjects with sharp edges cannot be transported in a safety grid for luggage.
The safety grid for luggage cannot protect cargo at failure.
|
|
If in a grid for luggage there are subjects, the seat of the forward passenger cannot be moved completely forward — the subjects which were in a grid can be damaged. |
Safety grid for luggage in a luggage carrier
At the left and on the right in a luggage carrier there are hooks-1-on which the safety grid for luggage is hung.
Hlyastik (arrow) should be turned into a luggage carrier.
Safety grid for luggage and hooks are calculated on transportation of easy cargo at normal movement. At failure they cannot protect cargo. We ask to observe specified on хлястике (shooter) data on cargo weight.
Refrigerating boxing in a back back
Press the switch:
1 Temperature
2 Incl. / Off.
Inclusion/switching off of refrigerating boxing
The switch-2-slightly press a symbol — the control light-emitting diode on the switch blinks about 30 seconds, and then burns constantly.
The switch-2-slightly press the party without a symbol — the control light-emitting diode on the switch dies away.
Temperature installation
Small snowflake — a low step of cooling.
Big snowflake — a high step of cooling.
When opening refrigerating boxing internal illumination of refrigerating boxing joins.
|
|
The capacity of cooling depends on the chosen step of cooling and temperature of external air. |
At inclusion of a large number of consumers of the electric power or an insufficient zaryazhennost of the storage battery refrigerating boxing can automatically be switched to lower step of capacity of cooling or be disconnected — the control light-emitting diode on the switch blinks. At restoration of sufficient tension refrigerating boxing again joins automatically.
Care of refrigerating boxing
If refrigerating boxing is not used a long time, it should be switched off, defrozen, washed out and for some time to leave a cover open. Washing of refrigerating boxing (Head Body).
Fire danger!
Do not close a ventilating lattice-4-in a luggage carrier.
Do not transport in a luggage carrier inflammable materials.
Removal of refrigerating boxing
Instead of refrigerating boxing it is possible to establish a ski cover. (Installation of a ski cover — address to below-mentioned materials).
Switch off refrigerating boxing.
Pull out the network tip-5-.
Turn out fixing bolts-6-.
Take out refrigerating boxing.
|
|
At the established refrigerator boxing the door-3-should be opened aside. The door is kept behind by a magnet. |
Installation of refrigerating boxing
Installation is made in return sequence.
Phone
General information
There is a danger of failure!
First of all pay attention to movement. Use phone 1 only if it allows a road situation.
Stop the car if you intend to have telephone conversation, using a receiver, instead of loud-speaking communication.
Remember that your car at speed of 50 km/h passes for a second of 14 m.
Using the radio telephones which aerials are in car salon, can lead to violations of work of electronic systems, and, thereby, is negative be reflected in operational safety of the car.
1 Observe legislative norms corresponding to the host country.
Using radio telephones in salon of the car is allowed only if they are connected to the separate external aerial allowed to operation by Mercedes-Benz firm.
(Using phone — address to the corresponding Operation manual).
Radio telephone in a runduchka under an armrest
Phone installation
Open a runduchok (higher in this Section).
Enter phone into a reception nest-1-before heard fixing of the tip-2-.
For fixing press phone in front-3-down.
Only in this situation phone is connected to loud-speaking installation.
|
|
Through a nest-4 - the modem can be connected. |
Conducting telephone conversations via the control panel radiotelephone communication
Press the button-5-. The reception nest-1-with phone leans back up.
Phone with the tip - 2-take out forward. The tip with a cable conducting to the external aerial, for conducting telephone conversation should remain inserted into phone.
Phone removal
Press the button-5-. The reception nest-1-with phone leans back up.
Press the lock of the tip-6-and take out phone forward.
Radio telephone in a ware box
Phone installation
Open a ware box (higher in this Section).
Switched-on phone insert into a reception nest-1-.
For fixing press phone in front-3-down.
Within about 30 seconds data from the telephone directory are read out in separate memory. After that phone is automatically switched off, and the charging of elements of a food of phone is made.
For stationary phone on hand there is only an only a few telephone directory of a radio telephone.
If you do not wish to read out the telephone directory, disconnect a radio telephone before installation it in a reception nest. In this case at your order and further there is a telephone directory of stationary phone.
Various providers of a network of a radio telephone and stationary phone:
All phone numbers in the telephone directory of a radio telephone should be entered into memory together with the corresponding codes of the cities. Only in this case all phone numbers can be gathered via stationary phone.
Conducting telephone conversations if the radio telephone is in a ware box, is impossible.
|
|
For ensuring continuous work of a communication system, it is impossible to turn on phone being in the holder. |
Phone removal
Press the button-4-.
The reception nest-1-with phone leans back up.
Remove phone.
After phone removal on hand again there is a telephone directory of stationary phone.
|
|
The tip-2-is rigidly connected with a reception nest - 1-therefore its unblocking is not required. |
Stationary phone in a runduchka under an armrest
Maintaining telephone conversations via the control panel radiotelephone communication
Phone removal:
Open a runduchok (higher in this Section).
Phone take out up-1-of a clamp.
Phone installation:
Enter phone into a clamp of the holder-2-and press down to heard fixing.
SIM-card (telephone card)
Switch off phone and take out.
Installation:
SIM-card (Subscriber Identity Module) insert into the slot-3-so that the chip in the direction forward was turned down.
Vynimaniye:
Take out the SIM-card.
Ski cover
Raskladyvaniye:
Lower a back armrest-1-.
Cast away a cover-2-down.
Spread out a ski cover and involve in salon.
Having pulled in a luggage carrier for the handle, open a door-3-. The door is kept by a magnet.
Loading
Place skis in a cover.
Ski cover attach belts to an armrest in a back part of salon-4-.
Pull a fixing belt-5-.
Hook on a carbine-6-for a bracket-7-.
There is a danger of a travmirovaniye!
The ski cover is calculated on 4 pairs skis.
Do not load into a ski cover extraneous subjects.
The cover with skis should be always fixed. In case of failure the loose cover with skis can lead to a travmirovaniye.
Folding:
Close a door in a luggage carrier.
Separate connection. For this purpose compress uvulas.
Unhook a carbine.
Straighten a ski cover.
Ski cover combine and enclose in a back back.
Cast away a cover-2-up.
|
|
Removal of a ski cover — for drying of a ski cover or if the space has to be used as a ware compartment or for refrigerating boxing. |
Removal:
Having pulled in a luggage carrier for the handle, open a door-3-. The door is kept by a magnet.
Having undertaken deepening-7-on a frame of a ski cover, press to the left and extend a cover back.
Unhook a carbine.
There is a danger of poisoning!
The ski cover is removed:
In order to avoid OG pronikaniye in salon the trunk lid during movement should be closed.
|
|
In order to avoid access of extraneous persons from salon in a luggage carrier close a door in a luggage carrier. |
Installation of a ski cover
Insert a ski cover through a luggage carrier into an opening. A frame of a ski cover establish at the left and fix on the right.
Lamps of illumination of a luggage carrier
If the trunk lid remains open a long time, lamps of illumination of a luggage carrier are switched off approximately in 10 minutes.
System of fastening of luggage on a roof
There is a danger of failure!
Observe an erection manual of the manufacturer.
Fastenings of luggage incorrectly fixed system on a roof or cargo can weaken.
The maximum load of a roof at application of systems of fastening of luggage on a roof makes 100 kg.
In order to avoid damages of the car use only the systems of fastening of luggage tested and allowed by us on a roof.
System of fastening of luggage on a roof screw only on fixing bolts (arrow) behind rubber consolidations of doors.
|
|
Elements of system of fastening of luggage on a roof should not limit the maximum way of lifting of the shifted and lifted top hatch. |
The traction coupling device (Trailer towage — address to the Section Driving and auxiliary systems)
(The sizes and loadings are specified in Specifications).
|
|
On a case of need of acquisition of a spare key bring key No. in real "Management". |
key No.
The spare key can be acquired at Mercedes-Benz station.
Cap removal
Take out a cap-1-down from a nest of fastening of a spherical head.
The spherical head is together with a spare wheel in an additional compartment under a trunk floor.
Cap-1-put in a compartment.
Installation of a spherical head
There is a danger of failure!
Installation of a spherical head carry out with special care as safety of hook-on structure depends on it as a whole.
The key-2-should be inserted.
The red zone should coincide with white marking (assembly situation), otherwise the lock in a makhovichka unlock a key - 2-in the arrow direction.
Pull for a makhovichok and turn it in a red zone before fixing.
Spherical head insert vertically into a fastening nest. Thus consider on a bumper marking for an insert-3-.
The spherical head is fixed automatically.
|
|
Marking for an insert is in the car middle below on a bumper. |
|
|
The green zone should coincide with white marking-4-. |
Blocking of a spherical head
For this purpose a key in the lock turn in the arrow direction.
Take out a key and get a protective cap.
Provision of movement
There is a danger of failure!
At violations of work or damage it is necessary to charge Mercedes-Benz stations check of all traction coupling device.
At traction coupling device non-use, we recommend to dismantle a spherical head.
Folding plug receptacle
If necessary cast away a plug receptacle down.
If the plug receptacle any more is not required, cast away it up.
Removal of a spherical head
Remove a protective cap, the lock in a makhovichka unlock a key.
Undertake a spherical head, pull for a makhovichok and turn red marking in a green zone before fixing a makhovichka.
Spherical head take out down.
Storage of a spherical head
The spherical head is together with a spare wheel in an additional compartment under a trunk floor.
There is a danger of failure!
Do not transport in salon a spherical head in a loose condition.
Otherwise at strong braking, sharp change of the direction of movement or failure passengers can be injured by a moving spherical head.
Cap nozzle
Insert a cap into a nest of fastening of a spherical head before fixing.
|
|
Pay attention to reliability of landing of a cap. |
Recommendations about leaving
At pollution it is necessary to make cleaning of a spherical head and a nest of fastening of a spherical head easy installation and removal at any time were provided.
|
|
It is impossible to make cleaning of a spherical head by the device for a wash of the car a stream of a high pressure, do not apply solvents. |
|
|
After cleaning apply a thin film oil or konsistentny greasing on the following places: |
1 fixing balls,
2 directing,
3 reception nest,
4 holiday lever,
5 spherical surface, and also on an arm of a spherical head on the car.
The lock oil not containing acids and pitches.
Then inspect working capacity on the car.
These works can be carried out also at Mercedes-Benz station.
Trailers with the 7-contact tip
Shtekernoye connection between the car with a 13-contact plug receptacle and the trailer having the 7-contact tip, can be provided by means of a transitional cable.
The transitional cable can be got at any Mercedes-Benz station.
1 Ledge
2 Flute
Installation:
Raise a cover. The tip insert a ledge into a flute and turn to the right against the stop. Let's to a cover be fixed.
Transitional cable freely fix on the trailer belts for cable fastening.
Power supply from a network
In your car there is a connection possibility to power supply from a car network. If the trailer needs power supply from a car network, insertion of a necessary safety lock should be made at Mercedes-Benz station.
|