: The lateral deflector and the deflector on a door are open.
11 — the Deflector on a door
12 — the Display and the keyboard
|
|
For the good ventilation preventing a draft, the handle a zaslonok of ventilating deflectors (1, 6, 9) fix in a certain situation. |
Display and keyboard
1 — Defrosting of glasses
2 — the Heating system of back glass (is lower in this Section).
3 — the Mode of use of residual heat of the engine
4 — Incl. / Off.
5 — air Distribution for the right side (automatically, manually)
6 — the Economic mode (without cooling)
7 — Perekidna the temperature switch, on the right
8 — Perekidna the switch of supply of air (automatically, manually)
9 — the Display
Indication on the display is carried out depending on external illumination, black figures on a light background (afternoon), or on the contrary, light figures on a black background (night).
10 — Perekidna the temperature switch, at the left
11 — an air circulation Mode
12 — air Distribution for the left side (automatically, manually)
13 — the Filter with absorbent carbon
In an automatic mode the automatic conditioner of air makes cooling or heating depending on intensity of the sun, temperatures of external air and the demanded temperature in car salon. When using function «A mode of use of residual heat of the engine» heating or ventilation of salon of the car can be made also at the switched-off engine.
If the economic mode system of cooling is chosen does not work.
To change the established temperature follows only small stages. The automatic conditioner of air can be established for the left and right parties separately.
The established temperature is reached with the greatest possible speed and supported by a constant.
General recommendations about the automatic conditioner of air
There is a danger of failure!
Visibility can be considerably worsened in view of a zapotevaniye of glasses if modes differing from recommended us were chosen.
The dust removal filter pollen and dust particles to a certain size completely is late.
If the salon is heated up by the sun, it is necessary to air quickly it prior to the beginning of a trip.
Runduchok between forward seats can be ventilated. Ventilation a runduchka on the average console under an armrest (is lower in this Section).
|
|
It is impossible to close ventilating openings in space between a back of a back seat and back glass. |
Cuts for an air admission on a cowl hold free from snow.
On the bottom of the car condensate can be formed.
At leakage of a coolant the conditioner compressor for protection against damage is automatically switched off. The cooling system any more does not work. The economical mode cannot be disconnected. In this case to address on one of Mercedes-Benz stations for check of the automatic conditioner of air.
The instruction on environmental protection!
In the automatic conditioner of air R134А coolant is applied. This coolant does not put harm to an ozone layer.
Basic provision of governing bodies — in an automatic mode
There are 3 possibilities of an automatic mode:
· Automatic mode of supply of air
· Automatic mode of distribution of air at the left and on the right
· Automatic mode of average deflectors
We recommend to you to include all 3 functions of an automatic mode:
Giving and distribution of air are regulated automatically.
To Perekidnye temperature switches at the left and on the right establish on 22°С.
Thereby the most pleasant temperature in the car is reached.
Automatic mode of supply of air:
Perekidna the switch of supply of air press A.Na the display «AUTO» is displayed
Automatic mode of distribution of air:
Press and fix both handles. Symbols, also are not visible any more.
Functions of an economic mode and mode of air circulation are switched off.
The automatic mode of the fan is at the same time activated.
Special provisions — choose only for short time
Manual regulation of distribution of air
Press the handle. The handle is put forward, symbols are visible, and. The handle turn according to demanded distribution of air.
Air outlet from averages and lateral deflectors, deflectors on doors and at a windscreen.
Air outlet from average and lateral, deflectors on doors and at a windscreen.
Air outlet from averages and lateral deflectors, deflectors on doors and in space for feet.
Return to automatically mode: Press and fix the handle. Symbols, also are not visible any more.
Manual regulation of supply of air
Perekidna the switch of supply of air press up or down. 7 steps of the fan can be chosen.
Defrosting of glasses
Press the button. On the display it is displayed.
The fan is switched to higher step, and warm air goes to deflectors of defrosting of lateral glasses and a windscreen.
By repeated pressing of the button the mode chosen before again joins.
Zapotevaniye of glasses from within
If necessary switch off an economic mode: press the button. The control light-emitting diode on the button dies away.
If necessary switch off an air circulation mode: press the button. The control light-emitting diode on the button dies away.
Air distribution at the left and on the right establish manually up.
Supply of air manually establish on the maximum step of the fan.
Increase temperature installation.
Open lateral deflectors and turn on lateral glasses.
Zapotevaniye of a windscreen outside
Include a screen wiper.
Press and fix both handles. Symbols, also are not visible any more.
Air circulation mode
Include an air circulation mode:
The control light-emitting diode on the button does not burn.
Quickly press the button. On the button the control light-emitting diode lights up.
Switching off of a mode of air circulation:
On the button the control light-emitting diode lights up.
Quickly press the button. The control light-emitting diode on the button dies away.
Inclusion of a mode of air circulation and activation of comfortable closing:
The control light-emitting diode on the button does not burn.
The button press more than 2 seconds, lateral glasses and the shifted and lifted top hatch are closed. On the button the control light-emitting diode lights up.
Switching off of a mode of air circulation and activation of comfortable opening:
On the button the control light-emitting diode burns. The button press more than 2 seconds, lateral glasses and the shifted and lifted top hatch move to situation in which they were before closing.
If after comfortable closing the window was manually lowered or the shifted and lifted top hatch is open, at comfortable opening situation in which they were before closing is not reached.
There is a danger of failure!
At temperature of external air is lower 5°С a mode of air circulation choose only for short time, glasses differently can mist over.
Switching of a mode of air circulation on a mode of supply of external air is made automatically:
· in 30 minutes at temperature of external air is higher approximately 5°С,
· in 5 minutes at temperature of external air is lower approximately 5°С,
· in 5 minutes if the economic mode was chosen.
At high temperatures of external air there is an automatic switching on an air circulation mode. Approximately in 30 minutes the partial supply of external air begins.
The filter with absorbent carbon and the air circulation considering the external maintenance of OG
The filter essentially reduces concentration of harmful substances and considerably detains smells.
Automatic switching on a mode of air circulation is made, if in external air concentration of an oxide of carbon (WITH) or nitrogen (NOH) oxides raised.
The mode of air circulation considering the external maintenance of OG, is impossible, if the economic mode or temperature of external air is chosen is lower 5°С.
Turning on of the coal air filter and air circulation, taking into account pollution of external air by the fulfilled gases:
The control light-emitting diode on the button does not burn. Quickly press the button. On the button the control light-emitting diode lights up.
Switching off of the coal filter and air circulation, taking into account pollution of external air by the fulfilled gases:
On the button the control light-emitting diode lights up.
Quickly press the button. The control light-emitting diode on the button dies away.
Turning on of the coal filter and air circulation, with the account pollution of external air by the fulfilled gases, and activation of comfortable closing:
The control light-emitting diode on the button does not burn. The button press more than 2 seconds, lateral glasses and the shifted and lifted top hatch are closed. On the button the control light-emitting diode lights up.
Switching off of the coal filter and air circulation, taking into account pollution of external air by the fulfilled gases, and activation of comfortable opening:
On the button the control light-emitting diode burns. The button press more than 2 seconds, lateral glasses and the shifted and lifted top hatch move to situation in which they were before closing.
If after comfortable closing the window was manually lowered or the shifted and lifted top hatch is open, at comfortable opening more situation in which they were before closing is not reached.
Function «Mode of use of residual heat of the engine»
In function «Mode of use of residual heat of the engine» heating or ventilation of salon of the car at the switched-off engine are made in the automatic conditioner of air.
Supply of air is established automatically.
Before inclusion: an electronic key in the lock of ignition turn in situation 1 or 0 or take out it.
Inclusion of a mode of use of residual heat of the engine: press the button. On the display «REST» is displayed.
Inclusion is impossible, if the storage battery is insufficiently charged.
Automatic inclusion:
· if the electronic key in the lock of ignition turns in situation 2.
· approximately in 30 minutes (at the activated function «Mode of use of residual heat of the engine» on the conditioner in a back part of salon: approximately in 15 minutes),
· if tension of the storage battery falls.
|
|
When falling working tension of the storage battery on the display of the automatic conditioner of air some time before function switching off «The mode of use of residual heat of the engine» is displayed a symbol of the storage battery.
At included independent heater/ventilation function «Mode of use of residual heat of the engine» cannot join. |
Economic mode
Inclusion: press the button. On the button the control light-emitting diode lights up.
The system of cooling does not work, and drying of air is not made.
By repeated pressing of the button the mode chosen before is again activated.
In an economic mode glasses therefore we do not recommend this mode can mist over.
Switching off/turning on of the automatic conditioner of air
Switching off:
press the button 0. On the display it is displayed «0».
The supply and air circulation are switched off. It is recommended to establish this mode only for short time. Glasses otherwise can mist over.
Inclusion:
press the button 0 or or press and fix at least one handle.
Ventilation a runduchka on the average console under an armrest
In a runduchka in the direction to the lever of the AT selector there is a ventilating nozzle.
Opening: the handle move up.
Closing: the handle move down.
Supply of air depends:
· from the established distribution of air,
· from the established giving of air,
· from the provision of opening of ventilating deflectors on the dashboard.
Air temperature approximately corresponds to the air temperature, leaving of average deflectors. It cannot be established separately.
|
|
In a runduchka there can be extremely high temperatures caused by limited space. Therefore at transportation of heatsensitive cargo it is necessary to close a ventilating nozzle of the included heating.
Ventilating nozzle in a runduchka do not close subjects. |
Deflectors in a back part of salon
1 Adjustable average deflector in a back part of salon, at the left
2 Adjustable average deflector in a back part of salon, on the right
3 Regulator of the average deflector in a back part of salon (model without the conditioner in a back part of salon)
Opening: a regulator rotate to the left.
4 Adjustable lateral deflector in a back part of salon
5 Regulator of deflectors in a back part of salon
Opening: a regulator rotate in the direction of lateral glass.
The conditioner in a back part of salon
1 Incl. / off a mode of use of residual heat of the engine (is higher in this Section)
2 Display
Indication on the display is carried out depending on external illumination: positively — black figures on a light background (afternoon), or it is negative — light figures on a black background (night).
3 Distribution of air above/below
4 Perekidna temperature switch, on the right
5 Perekidna switch of supply of air
6 Perekidna temperature switch, at the left
7 Adjustable average deflector in a back part of salon, at the left
8 Adjustable average deflector in a back part of salon, on the right
|
|
The conditioner in a back part of salon does not make cooling if the button of the automatic conditioner of air is pressed.
At unoccupied back seats (any of seat belts is not in the belt lock) the temperature from both parties is automatically established on 22°С. |
Basic provision of governing bodies in an automatic mode
We recommend to activate an automatic mode and establish temperature at the left and on the right on 22°С. Thereby, the most pleasant temperature in a back part of salon is reached.
Perekidna the switch of supply of air press A.Na the display «AUTO» is displayed. Supply of air is regulated automatically.
Manual regulation of supply of air
Perekidna the switch of supply of air press up or down. 7 steps of the fan can be chosen.
Management of the conditioner in a back part of salon via the control panel the automatic conditioner of air
Via the control panel by the automatic conditioner of air on the average console the conditioner in a back part of salon can be switched off and installation of a step of the fan and temperature is changed.
For this purpose on the automatic conditioner of air horizontally press on perekidny the switch of supply of air A and hold it pressed until on the display there will be no indication given above.
The conditioner in a back part of salon can be switched off and switched on by the button 0.
Perekidnym can be established by the switch of the fan a fan step, and perekidny switches of temperature — conditioner temperature in a back part of salon.
Approximately in 4 seconds after the last pressing of the button indication on the display dies away, and the automatic conditioner of air is switched to a regular operating mode.
Independent heater
Device of remote control:
1 Aerial
2 Display
3 Incl. / Off.
4 Button of a call of the program
5 Adjusting buttons
6 Cover
The independent heater makes heating or ventilation of salon of the car depending on the air of value established on the automatic conditioner and air temperatures in salon.
The device of remote control can caused all functions of an independent heater. It is possible to include an independent heater at once (immediate heating) or to program so that it automatically joined in demanded time (program heating).
By the switch on the average console the independent heater can join and be switched off and be dumped activated time of inclusion.
The independent heater joins only at temperature of cooling liquid below 70°С.
There is a danger of ignition and poisoning!
It is impossible to include an independent heater at filling stations and in the closed rooms without an extract (for example, in garages).
|
|
At the corresponding temperature and weather conditions can happen that the system, for example, at first makes ventilation, and then — heating. It provides possibility of achievement of the demanded temperature with the greatest possible speed. |
For achievement of the maximum radius of operation of the device of remote control the aerial during transfer is recommended to be put forward completely, and the device of remote control hold vertically. Transfer is made until on the display indication blinks.
The maximum radius of operation of the device of remote control makes 1000 m. From the closed rooms or owing to massive obstacles the radius of action can be limited.
Operating time of an independent heater established at manufacturer makes 50 minutes. However, it can be established and individually. The reference any Mercedes-Benz station on this matter will give.
The device of remote control can be stored by an independent heater in a ware compartment, in front of the selector lever, in the holder.
The car is equipped with the device of remote control. For each car one additional device of remote control of the same execution is provided. The reference any Mercedes-Benz station on this matter will give.
Before inclusion
Installation of demanded air temperature in salon by means of perekidny switches of temperature of the automatic conditioner of air (is higher in this Section). We recommend to establish temperature at the left and on the right on 22°С.
The independent heater automatically regulates the established temperature.
Immediate inclusion
Indication on the display of the automatic conditioner of air in a mode of an independent heater.
The independent heater can join the switch on the average console.
Indication on the display of the automatic conditioner of air in a mode of ventilation of an independent heater.
Inclusion of an independent heater by the switch:
Press the switch a symbol. The green control light-emitting diode lights up, and the display of the automatic conditioner of air is activated.
Inclusion independent heater/ventilation by the device of remote control:
The ON button on the device of remote control press until on the display of the device of remote control «On» will not start to blink. The display of the automatic conditioner of air is activated. At inclusion of an independent heater, the control light-emitting diode on the switch on the average console lights up.
Switching off
The independent heater can be switched off by the device of remote control or the switch on the average console.
The independent heater can be switched off by the device of remote control. At turn of an electronic key in the ignition lock in situation 2 the system of ventilation of an independent heater also is switched off.
Switching off by the switch:
the switch on the average console press a symbol. The green control light-emitting diode dies away.
Switching off by the device of remote control:
The OFF button on the device of remote control press until the display of the device of remote control «OFF» will not start to blink. The display of the automatic conditioner of air dies away. At the independent heater activated before the green control light-emitting diode on the switch on the average console also dies away.
Inclusion time
Can be set the 3rd time of inclusion, from them it can be activated respectively at one time inclusions.
Remove a cover on the device of remote control and press the button of a call of the program. On the display there is time of inclusion caused by the last.
Installation of time of inclusion:
Cause time of inclusion subject to change, press and hold pressed the button or until demanded time will be displayed.
Inclusion program heating / ventilation
Cover on the device of remote control remove and the button of a call of the program repeatedly press until on the display demanded time of inclusion will not be displayed.
At once after that the ON button on the device of remote control press until inclusion time will start to blink. On the switch on the average console the yellow control light-emitting diode lights up. The independent heater joins in demanded time.
Switching off program heating / ventilation
The independent heater can be switched off by the device of remote control or the switch on the average console.
Switching off by the switch:
The switch on the average console press a symbol of R of off. The yellow control light-emitting diode dies away.
Switching off by the device of remote control:
Cover on the device of remote control remove and the button of a call of the program repeatedly press until on the display inclusion time will not be displayed.
The OFF button on the device of remote control press until on the display of the device of remote control will not start to blink «--: - -». On the switch on the average console the yellow control light-emitting diode lights up.
|
|
If the independent heater already joined, it as it is described in head "Switching off", can be switched off.
Not later than what in 50 minutes the independent heater is automatically switched off. The control light-emitting diode dies away. |
Indication of a zaryazhennost of elements of a food
When falling working tension of the device of remote control is lower than a certain limiting value, by pressing the ON, OFF or P buttons and 10 seconds after transfer on the display there is «LO» indication. It is necessary to replace elements of a food immediately.
Replacement of elements of a food
1 Cover
2 Elements of a food
There is a danger of poisoning!
Store food elements far from children. In case of a proglatyvaniye of an element of a food immediately address to the doctor.
Cover-1-remove down with overcoming of provision of fixing.
Take out an old element of a food.
New element of a food-2-insert according to markings of poles + and - poured out on the case of the device of remote control.
Pull a cover from below.
The instruction on environmental protection!
Removal of the discharged elements of a food make according to requirements for environmental protection.
Heating system of back glass
Electronic key in the lock of ignition turn in situation 2.
Inclusion:
Control panels of the automatic conditioner of air press the button. On the button the control light-emitting diode lights up.
|
|
In case of an icing of back glass outside or coverings before inclusion of heating of back glass it is necessary to remove with its snow ice and snow. |
The heating system of back glass consumes a lot of electric power. Therefore it should be switched off at once after zapotevaniye disappearance.
Heating of back glass automatically is switched off depending on temperature of external air and speed of movement after about 6 — 23 minutes.
At inclusion of a large number of consumers of the electric power or an insufficient zaryazhennost of the storage battery the heating system of back glass can be disconnected.
In this case on the button the control light-emitting diode starts to blink.
At restoration of sufficient tension the heating system of back glass again joins automatically.