Mercedes S-Class W-220

since 1998 of release

Repair and car operation

W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
- Power shafts
   + Driveshaft
   + Power shafts
   - Differential
      Dismantling and differential assembly
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
      Determination of thickness of adjusting laying and its installation in the reducer case
      Check and adjustment of a gap of a flange
      Dismantling and differential assembly with automatic blocking
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы

Check and adjustment of a gap of a flange

Check a gap between a flange 33 and a conic gear wheel of a power shaft 17. If it is necessary, establish a lock ring 30а is thinner or is thicker. The thickness of a lock ring changes from 1.4 mm to 2.7 mm with a step of 0.05 mm. A gap between a flange and the differential case: 0.03-0.3 mm.