Mercedes S-Class W-220

since 1998 of release

Repair and car operation

W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
- Power shafts
   + Driveshaft
   + Power shafts
   - Differential
      Dismantling and differential assembly
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
      Determination of thickness of adjusting laying and its installation in the reducer case
      Check and adjustment of a gap of a flange
      Dismantling and differential assembly with automatic blocking
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы

Dismantling and differential assembly


13 — the differential Case
14 — Spherical laying
15 — Satellites
16 — the Finger

17 — Conic gear wheels of power shafts
18 — Persistent laying
19 — the Roller finger



1. Fix the case of differential 13.

2. Beat out a roller finger 19 and a finger of differential 16 of the case of differential 13 by means of a punch.

3. Remove satellites 15 with spherical laying 14 and conic gear wheels of power shafts 17 with persistent laying 18.

4. Check each element on lack of wear.



1. Insert a pin 046 into an opening in the differential case.

2. Establish both conic gear wheels of power shafts 17 with persistent laying 18 on a pin in the differential case.

3. Establish both satellites 15с spherical laying 14 and turn them by means of a pin 046.

4. Instead of a finger of differential insert a pin 021 into the differential case for fixing of conic gear wheels of power shafts and satellites.



1. Check the moment of rotation of differential. It should make 5-30 H • m.
2. Establish a finger of differential 16 and a roller finger 19.
3. Take the differential case from a vice.