Mercedes S-Class W-220

since 1998 of release

Repair and car operation



W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
- Routine maintenance
   Specifications
   Active system of the prevention of term of approach planned THAT (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and oil filter
   Check of brake system
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid. Liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual check of tightness of automatic transmission
   Condition check suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of central air of air
   Greasing of limiters of doors and lock cylinder
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Replacement of brake liquid
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы





Check of fuel system

 PERFORMANCE ORDER

Gasoline is extremely inflammable therefore at work with any components of fuel system it is necessary to accept special precautionary measures. Do not smoke, and do not come nearer to a venue of works with open fire or unprotected by the lamp shade carrying. Do not perform such works in the garages equipped with heating devices, working at natural gas (such, as водогреи, dryers, etc.). The working platform should be ventilated well. At gasoline hit on skin immediately wash away it water with soap. At carrying out any works with fuel system put on goggles and hold near at hand the fire extinguisher. In case of a gasoline spillage immediately wipe a pool, but do not keep the rags impregnated with gasoline in places where it can самовоспламениться.

1. If you felt a gasoline smell during movement or after the car stood on the sun, it is necessary to check a condition of all fuel system immediately.
2. Uncover a fuel tank and check it on existence of damages and corrosion. The sealing insert on a cover should be whole. In case of existence of damages or corrosion replace a cover.
3. Survey inlet and returnable lines of fuel system on existence of cracks. Make sure that connections between lines of fuel system and system of injection of fuel, and also between lines of fuel system and the built-in fuel filter did not weaken.

On the cars equipped with system of injection of fuel before serving fuel hoses, it is necessary to dump pressure in system. Address to Head of the Power supply system and release.

4. As some components of fuel system - for example, a fuel tank and some lines of fuel system - are in the lower part of the car, they are easier for examining, when the car is raised by the winch. If it is impossible, поддомкратьте the car and establish it on support.
5. On the raised car examine a fuel tank and a bulk mouth on existence of holes, cracks and other damages. Special attention give to a connection condition between a bulk mouth and a tank. Sometimes leakages of fuel occur owing to weakening of collars of fastening of a rubber mouth or because of damage of a material of a mouth. Examine all arms and tapes of fastening of a fuel tank to make sure that it is reliably strengthened on the car.

Never, under no circumstances, try to repair a fuel tank (excepting replacement its rubber a component). A flame of the welding device or any other opened fire easily can lead to explosion of evaporations of gasoline in a tank.

6. Carefully check all fuel hoses and the metal lines going from a tank on existence of weakened connections, twisting, signs of wear of materials of hoses and other damages. If necessary make repair or replace the damaged sections.





home