Mercedes S-Class W-220

since 1998 of release

Repair and car operation

W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
- Brake system
   Specifications
   Arrangement of components of the amplifier of emergency braking of BAS
   Arrangement of components of ESP system
   Dual main brake cylinder
   Vacuum amplifier
   Brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of brake shoes
   Removal and installation of a forward cable of a drive of the parking brake
   Adjustment of the parking brake
   System of anti-blocking of brakes of ABS, protivozanosny system - an arrangement of elements
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы

Removal and installation of brake shoes

Removal and installation of brake shoes of forward wheels

Removal and installation of brake shoes of back wheels

Sensor of the parking brake

Disk brake mechanisms

Address to an illustration.

Drum-type mechanisms of the parking brake

Removal

PERFORMANCE ORDER

1. Remove back wheels.
2. Remove brake disks of back wheels.
3. Remove a heat-shielding guard of final system.

4. Pull an automatic regulator. Turn an ekstsentrikovy finger of g counter-clockwise (approximately on 1/2 turns), using a key, and move it on some time ago in the longitudinal direction» so that the clown of b was blocked in a spring ring of d with h ledge.

5. Disconnect a returnable spring 111 by means of the lever 041.

6. Unhook a spring 107 by means of the lever 040.
7. Remove brake shoes 103 from flanges of power shafts 68.
8. Disconnect a returnable spring 112.

Installation

PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.

home