Mercedes S-Class W-220

since 1998 of release

Repair and car operation

W220 Mercedes
+ Mercedes-Benz Cars of a class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   - Forward suspension bracket
      Removal and installation of a forward suspension bracket
      Gap adjustment in the bearing of a forward wheel
      Nave of a forward wheel
      Rotary fist
      Stabilizer of cross-section stability
      Pneumatic rack shock-absorber
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment
+ electric equipment Cхемы

Nave of a forward wheel


5а — the Pin 9 — the Nave 9d — the Nut 9е — a nave Cover 9i — the Bolt	9т — the External konusny roller bearing 35 — the Back protective guard 023 — the Stripper

Removal

PERFORMANCE ORDER

1. Remove a forward wheel.
2. Remove and check a brake disk.
3. Uncover 9е naves.
4. Weaken a bolt 9i, unscrew a nut 9d and remove the external konusny roller bearing 9m.
5. Remove a nave of a forward wheel 9.

Check

PERFORMANCE ORDER

1. Check a back protective guard 35. If necessary, rumple it.
2. Check a pin 5а on lack of wear on saddles of the bearing or a contact surface of sealing rings.
3. Check the konusny roller bearing, its rings and sealing rings.

Installation

PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.
Amount of greasing for a nave: in a cover - 15 g, total - 60 g.

home